Description
Evidential breath tester with printer - Dräger Alcotest 9510 IR
After many years of experience Dräger company created optimized, durable and reliable alcotester for evidential tests. Model 9510 was designed to serve in mnay countries considering their alcohol content norms and regualtions. The breath tester with printer meets all of the norms defined in OIML R 126-1998.
-
USB Port
built-in
-
IR port
for remote control
-
Display of the evidential breath tester
touch-sensitive
-
Measurement
up to 3.00 [mg/L]
Breath tester Drager 9510 IR offers a few interfaces of information exchange with external devices and computer network. It contains 3 USB ports, 2 RS-232 ports, modem, ethernet and IR port.
The samples are collected with long, heated, flexible hose. Heating of the host eliminates water condensation providing conveniance for the user. Removable mouthpiece guarantees hygienic operation of the device. The measuring range of the sensor is from 0.00 [mg /] to 3.00 [mg / L]. The results of measurements, including date, Time , and other data are entered by the operator. We can print the results thanks to a quiet and high-speed thermal printer built-in breathalyzer.
Solid housing and rubber bumpers are another advantages of the evidential breath tester. The upper and lower part is very tight providing water protection. Additionally the device might be equipped with a transport handle what enebles moving it.
Additional advantages of evidential breathalyzer with printer Dräger Alcotest 9510 IR
-
Reliable and intuitive use
The device is operated through touch-sensitive display with high resolution. Intuitive interface guides the user through the particular stages of the test. The displayed texts are supplemented with acoustic and visual cues. To facilitate data entry, you can use an external keyboard.
-
Precise and quick measurements
The original sensor operating in IR band from Dräger company does not detect any additional substances which may have an influence on the test results. In some cases breathalyzer itself indicates the need to repeat the test.
-
Electrochemical sensor
Electrochemical snesor is characterized by a very small margin of error in the measurement. In this type of devices, sensor reacts to alcohol molecules, which determine the amount of alcohol in the breath. In this type of sensors, side-substances do not affect the result, thus electrochemical breathalysers are considered as evidential breathalyzers .
-
Power supply
Evidential breath tester 9510 IR is powered with network - 110 up to 240 V however in case of mobile application 12 V DC.
-
Built-in printer
The breath tester is equipped with quiet, economical and reliable printer that performs legible prints. Toner with cartridges is not required for the printer's operation. Operating costs are therefore negligible.
-
LCD display of the breathalyzer with printer
Evidential breath tester 9510 IR is equipped with touch-sensitive display with high resolution. The display may be either black-white or colourful depending on the version (the choice must be reported during the order).
Service and warranty of the evidential breath tester with printer Dräger Alcotest 9510 IR
The warranty covers a period of 2 years on the electronics and 1 year on sensor of the evidential breath tester. To take advantage of the warranty must be strictly the manufacturer's recommendations about the breathalyzer calibration must be followed. The calibration should be performed after 2500 measurements or at least once a year.
We offer you a variety of services which may be performed after the warranty perioid by our serviceman. Our laboratory is equipped with devices of the highest quality from global brand Guth LAB.
Specification
Specyfication of evidential breath tester with printer Alcotest 9510 IR | |
---|---|
1 optional electrochemical sensor while ordering 2-sensored breathalyzer | |
Measurement range | 0.00[mg/] up to 3.00[mg/L] |
Sensor type |
|
Power supply of the evidential breathalyzer |
|
Required calibration |
|
Display of the breath tester with printer |
|
Device setting | standard - with menu use |
Testing units: | mg/l |
Signes CE |
|
Alcohol concentration |
|
Operation temperature | -20°C up to +70°C |
Size | 325 × 250 × 55/185 mm |
Weight | 6,9 kg |