Flexible inspection camera Coantec ME with 6 mm probe and 100° visual angle with 360° rotation

Coantec ME is a professional flexible inspection camera that was designed for work in harsh conditions. Wide visual angle of camera and possibility of 360° rotation of the probe provide a wide frame view in the most difficult conditions. Modern 3.5” Sony display allows for a real-time view with 2 x zoom.

• 

  Operation time

  up to 4 h

• 

  Water resistance

  IP 67

• 

  Display

  3,5" LCD Sony

• 

  Probe

  6 mm diameter

Flexible inspection camera ME is a basic model of inspection cameras by esigned for everyday work in car garages, production plants and etc. The ME model is the base for the more advanced model M3. The device has an inspection probe on a 1-meter long cord with a diameter of 6 mm, which makes it possible to inspect hard-to-reach places in all kinds of installations.

The Flexible inspection camera has been equipped with a flexible “Snake”-type inspection cord ended with a 6 mm probe with a joint moving in 360° providing 100° visual angle. The device enables taking video recordings or photos in 768×576 resolution with 2x zoom in real-time view mode or 4 x zoom when viewing recorded footage. Video recordings are saved on removable SD cards. The camera comes with an 8 GB memory card.

The Flexible inspection camera is powered by >3200 mAh rechargeable battery which needs 3 hours to be fully charged and allows for up to 4 hours of continuous operation. Both the probe and the cord comply with the IP67 safety class which allows penetration of wet areas by the camera.

Coantec ME Flexible inspection camera has been designed mainly for everyday use by mechanics or at production plants. Flexible cord of the probe enables inspection at many different angles. The probe will perfectly do as a camera for checking pipes, plumbing installation and all kinds of other installations with no access from the outside.