Infrared wildlife camera LTL TV-6210MG with GSM module

Infrared wildlife camera is indispensable for game observations, for catching poachers and people littering the forests. The LTL 6210MG recorder will also work well as a round-the-clock monitoring of an apiary or a property.

• 

  Operation time of the infrared wildlife camera

  up to 6 months

  unlimited

• 

  Sending photos

  MMS

  e-mail

• 

  Operation mode of th infrared wildlife camera

  photos

  video

  photo + video

• 

  PIR motion sensor

  yes - 25 m

Infrared wildlife camera LTL 6210MG is a modernized upgraded model of a popular trail camera TV-6210M trail camera . The new model is an advanced device with great functionality. Using the GSM module the user is able to access the camera settings at any time and from anywhere on the earth. Application of 3 motion sensors gave huge advantages as the view angle of an average camera is somewhere about 50°, while the total view angle of 3 sensors is about 120°. The device will be perfect for watching wild nature, an apiary, a property or fish breeding ponds.

Applications of the infrared wildlife camera LTL TV-6210MG

• monitoring of apiary
• monitoring of bait stations,
• monitoring of fish breeding ponds,
• forests control
• animal watching,
• timber stock security ,
• catching poachers.

Key features of the infrared wildlife camera LTL TV-6210MG

• 

  CMOS matrix

  Image generated by the recorder features good quality owing to the CMOS matrix. High resolution of 12 MP provides image free of noise and therefore clear and sharp.

• 

  IR lighting 940nm

  The infrared wildlife camera has 28 diodes that emit IR light of with the wavelength of 940nm , which totally imperceptible by human as well as by animals.

• 

  PIR motion sensor

  The PIR sensor activates the trail camera when a motion is detected by one of 3 sensors. The reach of the sensor depends on the weather conditions and can vary from 14 to 25 m. After activation the device starts recording the image in one of 3 modes.

• 

  GSM module

  The infrared wildlife cameraLTL 6210MG has an advanced GSM module, which allows remote control of the camera settings. The GSM module also enables sending photos by MMS or e-mail, which is very useful when the operator does not have access to the device.

• 

  Selection of operation modes

  Featuring a selection of operation modes the camera with motions sensor will meet the requirements of any user. The recorder can operate in one of the following 3 modes:

  • photo – activation of PIR sensors takes from 1 to 10 shoots one by one,
  • video – activation of video recording of the length of 5 – 60 seconds,
  • time lapse mode – photos are taken with the pre-set frequency from 5 seconds to 60 minutes.
• 

  High power efficiency

  The device is powered by 12 batteries AA which allow for about 6 months operation in the stand-by mode. Power cells can be replaced at any time with no need to take the infrared wildlife camera down. When the power is lows the operator will be notified by SMS.

• 

  Marking recordings

  Collected footage can be marked with the date and time of the event, so the footage can be used as an evidence. The marking also includes information about ambient temperature and moon phases.

• 

  LCD colour screen

  The camera has been equipped with a built-in LCD colour screen, which not only helps during configuration but also enables a quick look through the collected footage with no need to eject the card.

• 

  Removable memory – SD cards

  Collected video and photo material is stored on removable memory cards with the maximum supported capacity up to 32 GB.

• 

  Password secured

  Additional protection is provided by possibility of setting up a 4-digit password so that the collected footage cannot be watched directly in the camera by unauthorised people.

• 

  Convenient mounting

  The infrared wildlife camera has a mount for mounting straps at the back to enable fixing the camera to a tree, a pole or a fence.