Add a review
-
Compliance with the description:
-
Durability:
-
Quality:
-
Usability:
Hello, if you already have an account, log in.
Attention! We have switched to a new store engine!
Our online store switched to a new IT infrastucture on February 23, 2023. Old accounts created before 23.02.2023 still work and you can easily log in using your old access data. However, your purchase history from before 23.02.2023 is no longer visible in your accounts. If, as an old customer, you need your data for previous orders (placed before 23.02.2023), please contact us by email.
You are a new user?
Create an accountCart: (0)
You do not know where to start?
See recommended productsOutdoor tracking camera BST886 - 14 Mpix sensor, 4G, 2G module
161,07 $ VAT included
4G connectivity
The BST886 photo trap is a camera with a wide range of outdoor applications. It will prove itself in difficult terrain without access to electricity. For power supply, AA batteries are enough which provide year-round operation. On top of that, the rugged and sealed housing (IP67), high-quality sensor (CMOS 14 Mpix) combined with a wide viewing angle (70°) and LEDs that do not emit visible light positions this equipment high in the classification of forest cameras.
GSM, 4G, MMS, 2G
48 LEDs
940 nm
up to 25 m
60° angle
approximately 12 months
Photo trap is undoubtedly the best solution for monitoring areas where access to electricity is severely limited or when it is simply absent. The BST886 has a wide range of applications and great functionality. Forest cameras and photo traps are usually used by wildlife conservationists, municipalities and entrepreneurs to monitor ponds, forests, breeding grounds of birds and animals. They also often work well for keeping an eye on outdoor stores of wood or other materials. Beekeepers also use them to secure their apiaries.
The camera has a large 14 Mpix CMOS sensor that can take high-resolution photos. Using interpolation, it can even take 36 Mpix photos. As for video recordings, the highest parameters are Full HD 1920×1080 images. With 12 AA batteries, it is able to last in standby mode for about a year. In this mode it remains until the PIR motion sensor detects no movement in the area of its range. Thanks to this solution, the camera does not accumulate footage where nothing happens and allows much longer operation. In the presented photocameras, the PIR sensor has a range of up to 25 meters and a wide viewing angle of 60°. This provides the user with a sizable control area. When motion is detected, the camera's awakening is barely 0.3 seconds to be fully ready to take a photo or switch on recording mode.
Additional infrared equipment, that is, built-in 48 LEDs emitting wavelengths of 940 nm, illuminate the observed area up to 30 meters. This illumination is invisible to the eye, so that every photo taken and every video recorded in difficult conditions will be made discreetly, while maintaining clarity and adequate contrast. The photo trap, while collecting material, will not frighten game or inform a potential thief entering the area under surveillance of its existence.
Both versions of the BST886 are equipped with wireless connectivity modules. They allow access to the device's functions via properly formatted SMS messages. For the version with a 4G module, the manufacturer has also provided a dedicated application, which allows greater interference in the settings of the photobucket. The version with 4G connectivity also guarantees faster data transfer, which is due to better technological capabilities and faster connection.
The photobooths can send captured photos via MMS, as can recordings of up to 30 seconds. The version with a 4G module can also be configured to send these materials to a predefined email address or FTP account.
Very high quality photos thanks to the CMOS sensor with a resolution of 14 Mpix.
The camera has an option to send the collected photo and video materials to predefined phone numbers in MMS messages or to e-mail addresses.
The 48 LEDs illuminate the monitored area up to 30 meters with wavelengths of 940 nm, which are invisible to the eye. As a result, photos and recordings from the camera are clear and have good contrast.
The built-in microphone allows you to record sound around the photo trap. It is possible to change the inclusion / exclusion of this option.
The built-in PIR sensor catches movement up to 25 m from the device and activates camera or camcorder mode (depending on the presets).
The device has 3 sensitivity modes to customize the operation. Low, normal and high sensitivity.
To power the device, the manufacturer suggests using 12 AA batteries. However, full functionality can be achieved with as few as 8 AA batteries. Of course, the more cells used, the longer the operating time. The BST886 photo trap lasts about 12 months in standby mode.
The camera is equipped with a 2.31” TFT color LCD display.
The photos taken and video files recorded are saved on SD memory cards. The device supports cards with a capacity of up to 32 GB.
If all the available space in the memory card used is full, the photo trap continues to work normally and collects new materials, overwriting the oldest ones in turn.
The immunity class in which the BST886 forestry camera is classified is the IP 67 standard. This is a guarantee of complete protection against dust and waterproof to a depth of 1 meter. The camera can work outside in extreme conditions without worry. As long as it is properly mounted, there is no need to worry about the weather.
Specification of BST886 2G Lite / BST886 4G phototrap | |
---|---|
Matrix | CMOS 14 mpix |
Lens | F=1,8 |
Viewing angle | 70° |
Modes of operation |
|
Image resolution |
|
Photo format | JPG |
Number of images in a series | 1-6 |
Video resolution |
|
Video format | MOV |
Length of recordings | 5 - 180 s |
Display |
|
IR illuminator |
|
Illuminator range | 30 m |
PIR sensor range | 25 m |
PIR sensor sensitivity |
|
Shutter release time | 0,3 s |
Data recording | removable SD cards up to 32 GB |
Power supply |
|
Interface |
|
GSM module | yes |
Waterproof | IP 67 |
Operating temperature | from -20°C to 60°C |
Dimensions | 145 × 118 × 82 mm |
Weight | 400 g |
Availability: Available
86,47 $ (brutto)
Availability: Available
216,19 $ (brutto)
Availability: On order
324,29 $ (brutto)
Availability: Available
313,48 $ (brutto)
Availability: Available
837,77 $ (brutto)
Availability: Available
108,09 $ (brutto)
Availability: Available
302,67 $ (brutto)
Availability: Available
335,10 $ (brutto)
Availability: Available
205,38 $ (brutto)
Availability: Available
724,27 $ (brutto)
Availability: Nonavailable
194,57 $ (brutto)
Availability: Available
281,05 $ (brutto)
Availability: Available
270,24 $ (brutto)
Availability: Available
248,62 $ (brutto)
Availability: On order
205,38 $ (brutto)
Availability: Available
388,08 $ (brutto)
Please sign in first.
Sign in