| Nobody has posted a review yet | |
| Rate / write a comment | |
Sales representative and Consultant
+44 (020) 3290 1199
The Pulsar Helion 2 XP50 Pro advanced thermal imager for long-range terrain observation meets the requirements of the most demanding users. It offers digital magnification of up to 20x, 8 color palettes and continuously updated software. It has a built-in stadiameter rangefinder.
The combination of a premium F50/1.0 lens and a NETD sensor with a sensitivity of less than 25mk translates into clear, high-contrast images. Precisely tracks the target even in adverse weather conditions. It sharpens the contours of details, even when there is minimal temperature difference between the elements. Unlike night vision devices, it does not require an external light source.
With 8 color palettes and 3 groups of settings for different environmental conditions, you can fine-tune the device to your environment. You can change the brightness and contrast of the image yourself or use the automatic algorithm. After all, the Pulsar Helion 2 XP50 thermal imager is designed to operate in a wide temperature range from -25°C to +50°C, even during precipitation (IPX7 waterproof).
The Pulsar Helion 2 XP50 Pro makes it possible to identify the observed object flawlessly, but also quickly measures the distance separating the observer from it (built-in stadiameter rangefinder). It takes pictures and records videos. Recorded images are stored in the built-in 16 GB memory, from where they can be transferred to other devices via a USB cable or the StreamVision mobile app.
Individual magnesium alloy components dissipate heat generated in the electronics during detection. They reduce image noise and protect the thermal imager from overheating. The "Display OFF" function puts the display to sleep without turning off the thermal imager, thus saving the battery. This one lasts up to 9 hours of detection. You can extend this time by connecting an external power source or replacing the battery with a higher-capacity model.
| Specifications of the Pulsar Helion 2 XP50 Pro Thermal Imager | |
|---|---|
| Diopter adjustment | -5/+5 |
| Sensor | Uncooled microbolometer, 17 µm |
| Sensor resolution | 640 × 480 |
| Linear field of view at 100 m | 21,8 - 16,3° |
| Field of view (angle) | 12,4 - 9,3° |
| Minimum sharp viewing distance | 3 m |
| Magnification | 2,5-20× |
| Spectral range | 8 - 14 microns |
| Lens | 50 mm F:1,0 |
| Digital magnification | 2× - 8× |
| Color palettes | 8 color palettes |
| Refresh rate | 50 Hz |
| WiFi operating range | 15 m |
| Observation range | 1800 m |
| Display | AMOLED HD |
| Display resolution | 1024×768 |
| WiFi module | 2,4 GHz 802,11 b/g/n |
| Power supply |
|
| Operating time | Up to 8 h |
| Recording format | .avi / .jpeg |
| Internal memory | 16 GB |
| Waterproof | IPX7 |
| Operating temperature | -25°C to +50°C |
| Dimensions | 234 × 55 × 58 mm |
| Weight | 500 g |
| Inbox |
|---|
| Specifications of the Pulsar Helion 2 XP50 Pro Thermal Imager | |
|---|---|
| Diopter adjustment | -5/+5 |
| Sensor | Uncooled microbolometer, 17 µm |
| Sensor resolution | 640 × 480 |
| Linear field of view at 100 m | 21,8 - 16,3° |
| Field of view (angle) | 12,4 - 9,3° |
| Minimum sharp viewing distance | 3 m |
| Magnification | 2,5-20× |
| Spectral range | 8 - 14 microns |
| Lens | 50 mm F:1,0 |
| Digital magnification | 2× - 8× |
| Color palettes | 8 color palettes |
| Refresh rate | 50 Hz |
| WiFi operating range | 15 m |
| Observation range | 1800 m |
| Display | AMOLED HD |
| Display resolution | 1024×768 |
| WiFi module | 2,4 GHz 802,11 b/g/n |
| Power supply |
|
| Operating time | Up to 8 h |
| Recording format | .avi / .jpeg |
| Internal memory | 16 GB |
| Waterproof | IPX7 |
| Operating temperature | -25°C to +50°C |
| Dimensions | 234 × 55 × 58 mm |
| Weight | 500 g |
