
- Average: 0
Nobody has posted a review yet
Rate / write a comment Sales representative and Consultant
Casper Antechi
Sales representative and Consultant
+44 (020) 3290 1199
Nobody has posted a review yet | |
Rate / write a comment |
Sales representative and Consultant
+44 (020) 3290 1199
Even more efficient and operationally stable, the Pulsar Helion 2 XQ50F thermal imager is an improved version of the popular Quantum HD and XD series. The sensitive sensor enables error-free target identification in difficult conditions when thermal contrast is low.
The Pulsar Helion 2 XQ50F thermal imaging monocular is distinguished by its long detection range. The 50mm focal length lens detects a person from a distance of 1800 meters. Together with the sensitive NETD sensor of less than 40mk and the advanced 384x288 pixel sensor, it guarantees high-quality images with visible details of low temperature difference.
The Pulsar Helion 2 XQ50F offers 8 color palettes and 3 groups of settings for different operating environments (forest, target identification and urban modes), with a manual image calibration function. You can fine-tune brightness and contrast, or use a ready-made algorithm to automatically adjust settings.
You can digitally increase the basic 4.5x zoom to 18x, depending on your needs. What's more, the Picture-in-Picture function allows you to detail and zoom in on a selected observation element in a separate window on the screen, while maintaining a wide field of view. This way, no detail will escape your attention.
The Helion 2 XQ50F thermal imager captures photos and videos, which it stores in its 16GB internal memory. It has a built-in WiFi module for connecting to mobile devices. The free Stream Vision mobile app gives you full control over the device. From it you can change image settings, share stored files, update the software and carry out live online broadcasts. In addition, the stadiameter will quickly measure the distance separating you from the target.
The magnesium alloy lens and heat sink effectively dissipate heat and thus reduce noise. The Pulsar Helion 2 XQ50F operates in a wide temperature range from -25°C to +50°C. It is waterproof (IPX7). The IPS7 battery allows it to operate for 9 hours, and you can extend this time by connecting a powerbank or replacing the cell with an IPS14.
Specifications of the Pulsar Helion 2 XQ50F thermal imager | |
---|---|
Diopter adjustment | -5/+5 |
Sensor | Uncooled microbolometer, 17 µm |
Sensor resolution | 384 × 288 |
Linear field of view at 100 m | 13,0×9,8° |
Field of view (angle) | 7.5×5.6° |
Minimum sharp viewing distance | 3 m |
Magnification | 4,5-18× |
Spectral range | 8-14 microns |
Lens | 50 mm F:1,0 |
Digital magnification | 2× - 3× |
Color palettes | 8 color palettes |
Refresh rate | 50 Hz |
WiFi operating range | 15 m |
Observation range | 1800 m |
Display | AMOLED |
Display resolution | 1024×768 |
WiFi module | 2,4 GHz 802,11 b/g/n |
Power supply |
|
Operation time | Up to 9 h |
Recording format | .avi / .jpeg |
Internal memory | 16 GB |
Waterproof | IPX7 |
Operating temperature | -25°C to +50°C |
Dimensions | 226 × 55 × 58 mm |
Weight | 500 g |
Inbox |
---|
Specifications of the Pulsar Helion 2 XQ50F thermal imager | |
---|---|
Diopter adjustment | -5/+5 |
Sensor | Uncooled microbolometer, 17 µm |
Sensor resolution | 384 × 288 |
Linear field of view at 100 m | 13,0×9,8° |
Field of view (angle) | 7.5×5.6° |
Minimum sharp viewing distance | 3 m |
Magnification | 4,5-18× |
Spectral range | 8-14 microns |
Lens | 50 mm F:1,0 |
Digital magnification | 2× - 3× |
Color palettes | 8 color palettes |
Refresh rate | 50 Hz |
WiFi operating range | 15 m |
Observation range | 1800 m |
Display | AMOLED |
Display resolution | 1024×768 |
WiFi module | 2,4 GHz 802,11 b/g/n |
Power supply |
|
Operation time | Up to 9 h |
Recording format | .avi / .jpeg |
Internal memory | 16 GB |
Waterproof | IPX7 |
Operating temperature | -25°C to +50°C |
Dimensions | 226 × 55 × 58 mm |
Weight | 500 g |