Description
Video sender for wireless transmission IP - CT-IP Mesh SDR 100 mW / 2W – image transmission from CCTV cameras
Digital video sender CT-IP MESH SDR 100 mW , thanks to CPFDM transmission, enables to transfer high resolution Full HD image while being small and consuming little energy - 7,5 - 10 mW. The embedded memory will enable to store recordings lasting many hours.
-
Wireless image transmission
-
Power supply of the video sender
7,5-10W
-
Quality of the recordings
Full HD
-
Day and night operation
CT-IP MESH SDR 100 mW is a digital video sender e.g. for cylindrical cameras CCTV CT-CC which uses reliable COFDM transmitting and H.264 coding technologies, thanks to which it ensures high resolution Full HD image transmission. Small size (only 56 mm in diameter) and low power consumption (7,5-10W) make it easy to hide the device and ensure long operation of the rechargeable batteries. Motion detection function allows for transmission and registration triggered by an incident within the reach of the camera connected to the device, which optimizes the use of the rechargeable batteries and memory.
CT-IP Mesh SDR video sender can be used as an independent image transmitter from HD-SDI cameras and / or as a connector in a net built of max. 16 transmitters, ensuring a very steady and secure connection. Optionally, the data can be coded with the help of the AES128/256 algorithm.
The data is saved in the embedded flash memory with the storage capacity of 128 GB, tagged with date and time. A modem working on the ISM band transmits and receives commands that allow to turn on / turn off the transmission and control the recording. What is more, VISCA and PELCO protocols that enable to control the cameras and PTZ heads are supported.
The potential and effective reach of the video sender can be improved by using the CT-PA MESH SDR 2W amplifier module. It enables to connect and charge the cameras with the help of PoE and DC out connector. It is possible to deliver the systems operating within the structure MIMO (Multiple Input, Multiple Output) and full transmission coding with the help of AER128/256 algorithms on demand.
Specification
Specification of the wireless video senders for IP cameras |
---|
CT-IP Mesh SDR 100 mW | CT-IP Mesh Power Amplifier 2W | CT-IP Mesh SDR 2W | |
---|---|---|---|
Video input | 2 streams Full HD 1920×1080 p30 | ||
Supported formats | 1920×1080i 60/ 59,94/ 50 Hz ... 720×576, 50 Hz | ||
Compression | kodek H.264 AVC, H.264, MPEG-4 part 10, high profile level 4.0 | ||
Codecs delay | 1 s to 10 ms (depending on operation mode) | ||
Encoder bit rate | 0,25 Mbps up to 32 Mbps | ||
Analogue audio input | Analogue audio input | ||
Digital audio input | SD/ HD-SDI 2 stereo | ||
Sound sampling | SD/ HD-SDI 2 stereo | ||
Kontrola kamer PTZ | protocols Visca and Pelco-D | ||
Serial input | 1k2 to 115k2, RS232 or RS485 | ||
Encryption | ABS32/ DES/ DES+/ optionally AES 128/256 | ||
Stream format | UDP Multicast / Unicast, RTSP Multicast / Uni-cast, ONVIF profile S | ||
Registration | built-in memory 128 GB | ||
Output power | 100 mW / 2W | ||
Frequency range | 2,3475 GHz up to 2,5 GHz | ||
Adjustable pace | co 125 kHz | ||
Protection class | IP 67 | ||
Storage temperature | -20°C up to +60°C | ||
Operation temperature | -10°C up to +50°C | ||
Power supply | 9 V - 18 V DC + polarity protection | ||
Power | 7,5 W (SD), 8,5 W (HD), 9,5 W (dual) | ||
Dimentions | 138 mm Ø 56 mm | 300×110×140 mm | |
Weight | 550 g | 3600 g |
CT-IP Mesh SDR 100 mW | CT-IP Mesh Power Amplifier 2W | CT-IP Mesh SDR 2W | |
---|---|---|---|
Catalog reference number | 1261101 | 1261102 | 1261100 |
Bandwidth | 8 MHz, 7 MHz, 6 MHz | ||
Errors correction | 1/2, 2/3, 3/4, 5/6, 7/8 | ||
Modulation types | QPSK, 16QAM, 64QAM | ||
Guard Interval | 1/4, 1/8, 1/16, 1/32 | ||
Bitrate | 1,555 Mbps - 31,668 Mbps |
Narrowband/UMVL
CT-IP Mesh SDR 100 mW | CT-IP Mesh Power Amplifier 2W | CT-IP Mesh SDR 2W | |
---|---|---|---|
Bandwidth | 2,5 MHz, 1,25 MHz (opt), 0,625 MHz (opt) | ||
UMVL bandwidth | 8 MHz, 7 MHz, 6 MHz | ||
FEC | 1/3, 2/3 | ||
Guard Interval | 1/8, 1/16 NB | ||
Bitrate | 144 kbps to 4,879 Mbps | ||
Bitrate UMVL | 1,317 kbps to 14,869 Mbps |
MESH
CT-IP Mesh SDR 100 mW | CT-IP Mesh Power Amplifier 2W | CT-IP Mesh SDR 2W | |
---|---|---|---|
Bandwidth | 10 MHz, 8 MHz, 7 MHz, 6 MHz, 5 MHz, 3,5 MHz, 3,0 MHz, 2,5 MHz | ||
FEC | adjustable 1/2, 2/3 | ||
Modulation types | adaptacyjne BPSK, QPSK, 16QAM | ||
Bitrate: max | 14,6 Mbps (TX/RX) | ||
Bitrate MIMO | max. 25,0 Mbps (TX), 12,4 Mbps (RX) |
In box
- CT-IP Mesh SDR 100 mW - 1261101
- CT-IP Mesh Power Amplifier 2W - 1261102
- CT-IP Mesh SDR 2W - 1261100 (set 100 mW Mesh Node z CT-IP Mesh Power Amplifier 2W)