
- Average: 0
Nobody has posted a review yet
Rate / write a comment Sales representative and Consultant
John Paine
Helpdesk
+44 (020) 3290 1199
Nobody has posted a review yet | |
Rate / write a comment |
Helpdesk
+44 (020) 3290 1199
Black Link HD5 by CamSat is the wireless HDMI transmitter that consists of a receiver and a transmitter that has been designed for wireless transmissions of not only Full HD images but also sound transmission in Surround 7.1 system within the range of 120 m without compression or delay.
5 GHz
120 m
Surround 7.1
RS-485 interface
The Black Link wireless HDMI transmitter by CamSat is a professional set consisting of a transmitter and a receiver and some accessories, which all together enable loss-free image transmission at the distance of 120 m. The device is powered by a V-Lock or Anton Bauer rechargeable battery and when the battery is discharged you can quickly and easily change it.
The Black Link HD5 wireless HDMI transmitter operates in 5 GHz band 40 MHz wide, so that the Full HD image is transmitted completely loss-free (almost zero latency). Thanks to RS-485 interface and multicasting, director and the team members can control the camera and watch the image simultaneously on a few screens at a safe distance e.g. sitting in a mobile transmission unit. As wiring is not required, the camcorder operator can freely move around. It is an excellent solution for live transmissions from riots, sport or mass events. If the signal disappears, the wireless HDMI transmitter immediately generates audible and visual alarms. In addition, it has a built-in input / output Tally system, which informs about the activity of a given camera while minimizing the number of devices needed for communication between the cameraman and the director.
Specification of the Wireless HDMI transmitter Camsat Black Link HD5 |
---|
BL-HD5100-K1 | BL-HD5100-K2 | BL-HD5100-K3 | BL-HD5100-K4 | |
---|---|---|---|---|
1 720p @50/59.94/60 Hz, 1080i@50/59.94/60 Hz, 1080p @23,98/24/25/29,97/30 Hz 2 standard V-Lock or Anton Bauer 3 photographic screw 3/4 inch 4 TALLY function | ||||
Application | indoor operation (not resistant for atmospheric conditions) | |||
5 GHz frequency | + | |||
Input / output HD-SDI | + | |||
Input / output HDMI | + | |||
Brak kompresji obrazu | + | |||
No lags | + | |||
HD viedeo format 1 | + | |||
Two-directional data transmission RS-485 | - | - | + | + |
Sound and optical notifications about signal loss | - | - | + | + |
Battery grip 2 | - | + | + | + |
Camera grip 2 | - | + | + | + |
Trivet mounting grip 3 | + | |||
TALLY function4 | - | - | + | + |
BL-HD5620-K1 | BL-HD5620-K2 | BL-HD5620-K3 | BL-HD5620-K4 | |
---|---|---|---|---|
1 720p @50/59.94/60 Hz, 1080i@50/59.94/60 Hz, 1080p @23,98/24/25/29,97/30 Hz 2 standard V-Lock or Anton Bauer 3 photographic screw 3/4 inch 4 TALLY function | ||||
5 GHz frequency | + | |||
Input / output HD-SDI | + | |||
Input / output HDMI | + | |||
No image compression | + | |||
No lags | + | |||
HD video format1 | + | |||
Two-directional data transmission RS-485 | - | - | + | + |
Optical and sound notifications about the signal loss | - | - | + | + |
Battery grip 2 | - | + | + | + |
Camera grip2 | - | + | + | + |
Trivet mounting grip 3 | + | |||
TALLY function4 | - | - | + | + |
Transmitter | Receiver | |||
---|---|---|---|---|
Interface audio-video | HD-SDI / HDMI | HD-SDI / HDMI | ||
HD-SDI (3G) standard | SMPTE 292M | |||
Transmission power | 13 dBm | 18 dBm | ||
Bandwidth (frequency) | 5 GHz | |||
Number of channels | 10 | |||
Bandwidth | 40 MHz | |||
Modulation frequency | OFDM 16-QAM | |||
Supported video resolutions | 720p @ 50/60 Hz, 1080i @ 50/60 Hz, 1080p @ 24/25/30/50/60 Hz | |||
Supported audio formats | 7.1 / 5.1 / Stereo (HD-SDI bedded) | |||
Transmission range | 120 m | |||
Transmission lag | < 1 ms | |||
Image compression | no | |||
Antennas connection |
| |||
Data transmission | RS-485 interface | |||
Supported data processing speed | 4800, 9600, 19200, 38400 [bps] | |||
Power supply |
| |||
Electricity consumption (maximum) |
| |||
Electricity consumption | 12 W | |||
Operation temperature | from -10°C up to 55°C | |||
Dimensions of the wireless HDMI transmitter |
|
Inbox |
---|
BL-HD5100-K1 | BL-HD5100-K2 | BL-HD5100-K3 | BL-HD5100-K4 | |
---|---|---|---|---|
Transmitter | BL-HD5000-T1 | BL-HD5000-T2 | BL-HD5000-T3 | BL-HD5000-T3 |
Receiver | BL-HD5000-R1 | BL-HD5000-R3 | BL-HD5000-R4 | |
Omnidirectional antennas BL-AP | 10 pieces | |||
BL-AD antennas | - | 2 pieces | ||
Power supply CX-12/2; 12 V DC | 2 pieces | |||
RS-485 standard | - | - | yes | yes |
Battery grip V-Lock mounted on transmitter | - | yes | yes | yes |
User manual | + | |||
Declaration of confirmity | + |
Specification of the Wireless HDMI transmitter Camsat Black Link HD5 |
---|
BL-HD5100-K1 | BL-HD5100-K2 | BL-HD5100-K3 | BL-HD5100-K4 | |
---|---|---|---|---|
1 720p @50/59.94/60 Hz, 1080i@50/59.94/60 Hz, 1080p @23,98/24/25/29,97/30 Hz 2 standard V-Lock or Anton Bauer 3 photographic screw 3/4 inch 4 TALLY function | ||||
Application | indoor operation (not resistant for atmospheric conditions) | |||
5 GHz frequency | + | |||
Input / output HD-SDI | + | |||
Input / output HDMI | + | |||
Brak kompresji obrazu | + | |||
No lags | + | |||
HD viedeo format 1 | + | |||
Two-directional data transmission RS-485 | - | - | + | + |
Sound and optical notifications about signal loss | - | - | + | + |
Battery grip 2 | - | + | + | + |
Camera grip 2 | - | + | + | + |
Trivet mounting grip 3 | + | |||
TALLY function4 | - | - | + | + |
BL-HD5620-K1 | BL-HD5620-K2 | BL-HD5620-K3 | BL-HD5620-K4 | |
---|---|---|---|---|
1 720p @50/59.94/60 Hz, 1080i@50/59.94/60 Hz, 1080p @23,98/24/25/29,97/30 Hz 2 standard V-Lock or Anton Bauer 3 photographic screw 3/4 inch 4 TALLY function | ||||
5 GHz frequency | + | |||
Input / output HD-SDI | + | |||
Input / output HDMI | + | |||
No image compression | + | |||
No lags | + | |||
HD video format1 | + | |||
Two-directional data transmission RS-485 | - | - | + | + |
Optical and sound notifications about the signal loss | - | - | + | + |
Battery grip 2 | - | + | + | + |
Camera grip2 | - | + | + | + |
Trivet mounting grip 3 | + | |||
TALLY function4 | - | - | + | + |
Transmitter | Receiver | |||
---|---|---|---|---|
Interface audio-video | HD-SDI / HDMI | HD-SDI / HDMI | ||
HD-SDI (3G) standard | SMPTE 292M | |||
Transmission power | 13 dBm | 18 dBm | ||
Bandwidth (frequency) | 5 GHz | |||
Number of channels | 10 | |||
Bandwidth | 40 MHz | |||
Modulation frequency | OFDM 16-QAM | |||
Supported video resolutions | 720p @ 50/60 Hz, 1080i @ 50/60 Hz, 1080p @ 24/25/30/50/60 Hz | |||
Supported audio formats | 7.1 / 5.1 / Stereo (HD-SDI bedded) | |||
Transmission range | 120 m | |||
Transmission lag | < 1 ms | |||
Image compression | no | |||
Antennas connection |
| |||
Data transmission | RS-485 interface | |||
Supported data processing speed | 4800, 9600, 19200, 38400 [bps] | |||
Power supply |
| |||
Electricity consumption (maximum) |
| |||
Electricity consumption | 12 W | |||
Operation temperature | from -10°C up to 55°C | |||
Dimensions of the wireless HDMI transmitter |
|
BL-HD5100-K1 | BL-HD5100-K2 | BL-HD5100-K3 | BL-HD5100-K4 | |
---|---|---|---|---|
Transmitter | BL-HD5000-T1 | BL-HD5000-T2 | BL-HD5000-T3 | BL-HD5000-T3 |
Receiver | BL-HD5000-R1 | BL-HD5000-R3 | BL-HD5000-R4 | |
Omnidirectional antennas BL-AP | 10 pieces | |||
BL-AD antennas | - | 2 pieces | ||
Power supply CX-12/2; 12 V DC | 2 pieces | |||
RS-485 standard | - | - | yes | yes |
Battery grip V-Lock mounted on transmitter | - | yes | yes | yes |
User manual | + | |||
Declaration of confirmity | + |