Camera detector - SPIN-2 camera detector - detection within 1000 m, 808 nm IR beam range, operating time min. 5 h

SPIN-2 is a professional hidden camera detector, whose operation is based on the effect of light reflection. The device is equipped with long-focus lenses - effective both in bright light conditions and at night.

Reflective effect a guarantee of effective detection

SPIN-2 is one of the most advanced designs. It is equipped with a semiconductor laser with an IR diode that acts as a conveyor - it is a source of probe radiation. The channel forms a laser beam in the form of a vertically placed rectangular raster. The reflected signal is recorded by a light-sensitive CCD video camera.

The device's operation is based on the reflection effect. It relies on the ability of optical objects to reflect probe radiation in the opposite direction, at an angle, near the corner of its incidence.

Excellent performance - detection range up to 1000 meters

The detection range of unwanted video recorders reaches up to 1000 meters. Good vision is due to the lens with a focal length of 75 mm and a FOV of 4.9° x 3.6°. The wavelength range of the laser illumination is up to 808 nm.

Customize settings to suit your needs

The SPIN-2 camera detector gives you the ability to customize settings to achieve the best possible performance. The user can change the power of the light raster to achieve favorable image contrast.

Light spots marking cameras

Using the SPIN-2 camera detector is very simple and involves scanning the space where a hidden recorder may be located. The user then sees bright spots of light in the viewfinder, indicating the location of the wanted devices. Everything appears on the AMLCD 0.44" 640x480 p micro display.

If outside the raster zone these points disappear, they should be considered as a potential camera. Traces that do not disappear when the laser illumination is turned off are not considered as possible recorders.

Three different variants of the SPIN-2 camera detector

The device is available in three different variants. The SPIN-2P model is equipped with binoculars with a protected blender that reduces the level of illumination of the user's face. The SPIN-2M version, on the other hand, has a special metal housing to protect it from damage.

In both cases, the camera detectors feature the same technical parameters as the classic SPIN-2 variant.

Minimum 5 hours of continuous operation on a single charge

The SPIN-2 camera detector is powered by four 7V 18650 batteries. Fully charged, the device allows for no less than 5 hours of continuous operation at maximum consumption.