CMA-100 Countermeasures Amplifier for detection of surveillance devices, which are wired in a building
CMA-100 Countermeasures Amplifier for detection of surveillance devices, which are wired in a building

  • Customer rating:
    Average: 0
    Nobody has posted a review yet
    Rate / write a comment
  • Delivery from £ 3.50
    Delivery servicePrepaymentCash on Delivery
    UPS delivery service £ 3.50 £ 8.50
    See shipping costs
  • Ask Expert: (44) 20 3290 1199
    Sales representative and Consultant
    John Paine

    Helpdesk

    (44) 20 3290 1199

CMA-100 Countermeasures Amplifier for detection of surveillance devices, which are wired in a building

  • Highly sensitive
  • Portable construction
  • Display
  • Filters positioning
  • intuitive operation

Available

59052030

Add to cart

  • Print

More info

Countermeasures Amplifier CMA-100 for detection of surveillance devices, which are wired in a building

CMA-100 - countermeasures amplifier is a counter surveillance tool for detection of electronic devices, which are attached to the wiring of the building.

The contermeasures amplifier detects among others LAN and server systems, telephone wiring, AC power, and alarm wire. The device is equipped with sophisticated automatic gain control circuit function, which makes it unique in comparison to other devices of this type.

The device is extremely efficient. There are minimal distortions while monitoring large signals. Moreover, adjustable bias voltage is able activate devices that are voltage or sensitive to current.

The CMA-100 countermeasures amplifier is also equipped with AC/DC digital voltmeter, select-able audio filters, and a wide dynamic range.

The advantages of the Countermeasures Amplifier CMA-100 for detection of surveillance devices, which are wired in a building :

  • Independence of the balanced input of 50K ohm, can withstand being attached to live power lines with voltages up to 250V, and provides up to 115dB of gain;
  • Automatic Gain Control AGC that has 105 dB of control;
  • Signals as large as 31V peak-peak can still be monitored with minimal distortions;
  • Manual gain control may be set to 0, 25, 50, 75, or 100 dB;
  • Positioning of filters to FLAT, LOW PASS, HIGH PASS, or BAND PASS.

Manufacturer

Research Electronics International (REI)

Research Electronics International (REI) was founded in 1983 in Cookeville, Tennessee, USA . REI's clients are mostly government agencies, law enforcement bodies, security companies and professionals who deal with surveillance protection and protection of confidential data . REI...

Specification

Specification of the CMA-100 Countermeasures Amplifier for detection of surveillance devices
Input impedance:
  • 50k balanced
  • Common mode rejection: >75dB
  • Maximum usable input: 31V p-p
  • Preamp auto attenuator: 0 to -40 dB (with overload warning LED)
Bias control:
  • 0 to +/-14.5V DC, 5mA max (over current protected, input impedance is reduced to 3.6k ohms when bias is active)
Maximum input voltage
  • 250V AC/DC
  • Leakage resistance to case: >10M
Automatic Gain Control
  • Manual gain control: 0, 25, 50, 75, 100 dB
  • Headphone gain control: 0 to 15 dB
  • Maximum system gain: 115 dB manual mode, 120 dB in Auto Mode
Digital voltmeter
  • 3.5 Digit, auto zero, auto polarity, +/-199.9V AC/DC
Frequency response
  • No filtering: 25 Hz to 44Khz
  • High pass filter: 320Hz to 44kHz
  • Low pass filter: 25Hz to 3.2kHz
  • Band pass filter: 320Hz to 3.2kHz
Audio
  • Headphone audio output
  • Line-out audio output: 600
Power
  • Power on/low battery LED (LED off @ 6.0V)
  • Battery: 9V Alkaline (5 - 30 hours typical run time)
Mechanical
  • Unit dimensions: 7.3"(184.4 mm) x 2.75"(69.8 mm) x 1.75"(44.5 mm)
  • Unit weight: 12.1 oz (343 g)

Inbox

  • CMA-100 Countermeasures Amplifier

Reviews (0)